Published at Tuesday, December 19th 2017. by Veronica Hendrix in Home Design.
New home ideas can turn an otherwise simple home into something spectacular, such as with adding features that would have been more common in older homes, like the ceiling medallions and crown moldings. Such features add beauty and interest to what would otherwise be very bland spaces. A smart idea that uses space wisely includes maximizing every square inch available, such as in the commonly wasted space beneath a staircase, which can be altered with fitted pull out drawers. This would provide space to store outerwear, footwear, and much more!
These are only a few points to consider in the design of your hangar home - there are many others. Due to the uniqueness of hangar homes design it is recommended that you choose a designer who has had ample experience in designing hangar homes and who preferably lives and a hangar home personally. If you are looking for designs on the Internet, you will likely become frustrated. If you are intending to invest in a hangar homes to be built, it is best to find a designer to custom design a plan uniquely for you. Regardless of what type of design you end up building, your decision to design and build a hangar home will be, without doubt, one of the most thrilling and fulfilling actions you will take a pilot.
Another thing to consider is fuel. Do you want to keep fuel in a fuel tank that you will keep inside your hangar? Perhaps there is fuel on the property that is maintained by the Association; this can be an excellent way when available. Of course, one can always fly out for fuel and this is workable most of the time but it does require careful organization of ones flights and fuel stops.
The structure over the hangar door is an important consideration. Hangar doors are usually quite wide varying from a minimum of 40 feet on up to greater than 55 feet wide. The header or beam spanning across the top of the door needs to be considered structurally. One way to handle this is by placing a steel I-beam across the door which will hold the weight of the roof. There are several disadvantages to this including higher construction costs due to the steel fabrication issues. Another disadvantage is that the beam bottom will usually fall well below the ceiling of the hangar causing the hangar door to be shorter than the ceiling height. Another, perhaps better, way to handle this is to use some sort of a gable roof or a modified gable roof over the hangar door. This allows the truss system of the roof to act as its own beam. Often the truss that spans over the door is a multi-ply truss and its bottom can be even with the ceiling height of the hangar. This allows the door to be higher and nearly the same height as the ceiling of the hangar. When designing the hangar discuss this aspect with the designer engineer who will work with you to determine the best solution.
Because lot sizes vary from large to small, setbacks may be an issue. Another factor is whether or not the site is level or has a slope. Sloped sites are quite workable but present unique challenges that must be considered. Generally on sloped lots the hangars are placed on the lower section and the home on the higher section which allows the home and hangar to blend with one another nicely.
The area that received the most attention was the kitchen. 22 percent of respondents in the A.I.A report said the size of the kitchen is increasing in new home design and construction. The rediscovered focus on size opens up the possibility of remodeling and addition work that can be done in this popular and lucrative sector. The dominant feature requested for new kitchens are renewable materials. Almost half of the surveyed architects said that materials such as bamboo, cork and concrete are becoming increasingly popular.